HV 750watt Large Laser Power CO2 Power Source

ZR-750WA CO2 laser power supply

Feature:

1.This 750watt CO2 power supply includes five high-quality 150W laser power supplies in parallel. With the 5 cores folding CO2 tube,It will be used on large power laser cutting machine.

2. The laser power control is simple, the large laser power CO2 power source can use 0-5V signal to control the laser power. Also this large laser power CO2 power source uses the PWM (pulse width modulation) signal for laser power control too.

3. This 750watt CO2 power source has easy and simple control method which uses high and low level for laser power control. The use of TTL-level control can realize start and stop. At the same time the 750watt CO2 power source has a protection switch, testing is made by external water and ventilation.

4. This HV CO2 power source has stable working performance: Each HV CO2 power source has been much more testing procedures and under full load high temperature (52~55 degrees celsius) 24 hours of aging, which ensure the stability of each HV CO2 power source.

5. The large laser power CO2 power source adopts ordinary H/L/P/G/IN/5V to receive laser control signal. And the power supply's housing case is made of galvanized sheet and aluminum upper cover and base case

6. The 750watt CO2 power source has good protection function: The 750watt CO2 power source have open circuit protection to make this 750watt CO2 power source work for a short time in the open state, so as to make it avoid the laser tube damage.

7. The HV CO2 power source has good compatibility : The HV CO2 power source can match with 750W or 800W glass laser tube manufactured by Yongli,EFR,SPT,Weiju and other factories, besides this feature, the HV CO2 power source also has strong adaptability and fast response, engraving or cutting benefits good effect.

Specification