Grey 100watt PWM/0-5V Control Laser Power Source

BR-100W CO2 laser power supply

Feature 

1. Grey laser power source has good compatibility which can drive most brand 1400mm  1450mm 100watt or 120watt glass laser tube,

2.  The PWM/0-5V control laser power source has strong adaptability and quick response, engraving or cutting good effect.

3..This 100watt laser power source has stable laser output performance: Each grey laser power source have been more testing procedures and under full load high temperature (52~55 degrees celsius) 24 hours of aging, which ensure the stability of each 2PCS flybacks laser power source.

4.The 100watt laser power source has good protection function: The PWM/0-5V control laser power source has open circuit protection function to make the 2PCS flybacks laser power source to short-term work in the open state, so as to make it avoid the laser tube broken.

5.This grey laser power source has simple control which selects high or low level for control. The use of TTL-level control can realize start and stop fast.

6. At the same time PWM/0-5V control laser power source adds a protection switch, testing is made by external water and ventilation.

The laser power control is simple, it can use 0-5V analog signal to control the laser power. Also it can also use the PWM (pulse width modulation) signal for laser control.

7. The BR-100watt laser power source uses ordinary H/L/P/G/IN/5V as laser control signal. And it uses black steel outside case.

8. This 2 flybacks laser power source has one fans for air cooling. The Fan uses high quality bearing as main spare parts and it can offer very long time cooling for the 100watt laser power source.

Specification