5V/PWM RECI W4 100W Laser Power Supplies

DY-13 CO2 laser power supply

Features:

1. This Reci W4 Laser Power Supplies use zero current and half bridge soft switch circuit, it makes this Reci W4 Laser Power Supplies have high efficiency and quick response speed. Thus it is easy to match with REC W4 100W CO2 laser tube.

2. The laser output power of this 100w Laser Power Supplies can be controlled by 0-5V analog signal or PWM signal.

3.This 5v/pwm Laser Power Supplies are easy to be controlled, it is suitable to High or Low level signal. The TTL level can control start or stop of laser output. While the 5v/pwm Laser Power Supplies have emergency protection switch which can indicate water through and ventilation.

4.This Reci W4 Laser Power Supplies have open circuit protection function. When protective earthing is good, this Reci W4 Laser Power Supplies can be in open circuit status during short time. This function can protect Reci W4 Laser Power Supplies. when laser tube burst.

5. This 100w Laser Power Supplies use ordinary H/L/P/G/IN/5V interface as laser control signal and it uses blue aluminum case which is good for heat dissipation of internal electronic components.

6.Aging test:Each 5v/pwm Laser Power Supplies must pass this test which is taken at 60 degree centigrade for 12 hours in full load status. And the 5v/pwm Laser Power Supplies must start and stop at each 7 seconds for 500 times. In this way we can ensure the laser power supply is qualified.

Specification: