CO2 Power Supply For Reci Laser Tube

1.This Reci W4 Laser Power Supplies uses zero current and half bridge soft switch circuit, it makes this Reci W4 Laser Power Supplies have high efficiency and quick response speed. Thus it is easy to match with REC W4 100W CO2 laser tube.
2.The laser output power of this 100w Laser Power Supplies can be controlled by 0-5V analog signal or PWM signal.
3.This 5v/pwm Laser Power Supplies are easy to be controlled, it is suitable to High or Low level signal. The TTL level can control start or stop of laser output.

1. The RECI W8 tube laser power sources have good compatibility : This RECI W8 tube laser power sources can match with RECI W8 model 1850mm 150Watt glass laser tube,besides this feature, the RECI W8 tube laser power sources also has strong adaptability and fast response, engraving or cutting benefits good effect.
2.This DY-20 150W laser power sources uses ordinary H/L/P/G/IN/5V interface to receive control signal. The The blue coated aluminum shell is conducive to the heat dissipation of electronic components on this DY-20 150W laser power sources..
3.The DY-20 150W laser power sources has good protection feature: The DY-20 150W laser power source has open circuit protection to make this DY-20 150W laser power sources works for a short time in the open state, so as to make it avoid the laser tube broken.

1. Good compatibility: The 150W power supply can drive Reci W8 150Watt sealed glass type CO2 laser tube and it also has a strong adaptability and fast response, cutting advantages of good effect.
2. This Reci W8 TUBE power supply adopts G/P/L/G/IN/5V as control signal output interface.The Reci W8 TUBE power supply adopts aluminum outside shell which is good for air cooling..
3. Thepower supply for laser cutting has stable working performance: Each power supply for laser cutting has been much more rigorous testing procedures, under full load high temperature (52~55 degrees Celsius) 24 hours of aging, to ensure the stability of each power supply for laser cutting.

1. The RECI W8 laser tube driver’s control is easy and simple. It adopts high and low level control, the TTL-level control makes laser beam’s output start and stop quickly.
2.The DY-20 laser tube driver has excellent protection function. The DY-20 laser tube driver has open circuit protection, which make this reci w4 power supply has short-term work in the open circuit status which avoid the laser tube burst due to the damage caused by DY-20 laser tube driver. In this way it greatly enhancing the reci w8 power supply’s service time.
3. This.150W laser tube driver uses imported USA,Japan,German,France and Taiwan’s high quality components for major parts to avoid the error in future and strengthen service time. This 150W laser tube driver can be widely used to work with RECI W8 150watt CO2 laser tube.

1.This Dy-10 Co2 Laser Power Supply adopts zero current and half bridge soft switch circuit, it makes the Reci 80w Co2 Laser Power Supply have high efficiency and quick response speed. Thus it is easy to match with REC W1 or W2 80W CO2 laser tube.
2.This 80watt laser power supply is easy to be controlled, it is suitable to High or Low level signal. The TTL level can control start or stop of laser output. While the blue Co2 Laser Power Supply has emergency protection switch which can indicate water through and ventilation.
3.The laser output power of this Dy-10 Co2 Laser Power Supply can be adjusted by 0-5V analog signal or PWM signal.

1.This dy-13 100w co2 power supply uses ordinary H/L/P/G/IN/5V interface as laser control signal and it uses blue aluminum case which is good for heat dissipation of internal electronic components.
2.  TheI laser output power can be adjusted by 0-5V analog signal or PWM signal on this analog signal co2 power supply.
3.This blue co2 power supply adopt zero current and half bridge soft switch circuit which makes this blue co2 power supply have high efficiency and quick response speed. Thus it is easy to drive RECI 100-120watt CO2 laser tube.

1. The 90W power supply’s control is easy and simple. It adopts high and low level control, the TTL-level control makes laser beam’s output start and stop quickly.
2. This.90W power supply uses imported USA,Japan,German,France and Taiwan’s high quality components for major parts to avoid the error in future and strengthen service time. The 90W power supply can be widely used to work with RECI W2/W1 CO2 laser lamp.
3.The aluminum shell power supply has the protection switch. Laser power control is simple, it can use 0-5V analog signal or PWM (pulse width modulation) signal to adjust and control laser power’s output.

1.With open circuit protection, this 1650mm co2 tube driver can work in an open-circuit state for a short time, which can avoid the damage of the 1650mm co2 tube driver caused by the bursting of the laser tube.
2.The dy-20 co2 tube driver adopts two PCS fan for cooling. It use two Taiwan’s bearing which make the fan runs for very long time.
3.This 1650mm co2 tube driver selects H/L/P/G/IN/5V green terminal board to receive laser control signal and it has aluminum outside case...

1.The 150W laser power supply’s control is applicable to high/low level signal. TTL level is to control the on/off of the laser power with a protective switch to check water-flow and ventilation.
2 This 3PCS flybacks laser power supply is equipped with two cooling fans. Better heat dissipation can protect the internal electronic components of this 3PCS flybacks laser power supply
3.Input analog signal(0~5V) or PWM is used to control the output laser power on this reci w6 tube's laser power supply.