130W Laser Tube's High Voltage CO2 Power Supplies

  • 130W Laser Tube's High Voltage CO2 Power Supplies
  • 130W Laser Tube's High Voltage CO2 Power Supplies
130W Laser Tube's High Voltage CO2 Power Supplies
  • ZRsuns
  • Linyi China
  • 1-2 working days
  • 30000PCS each month

1. This laser tube's CO2 power supplies adopts G/P/L/G/IN/5V as control signal output interface.The high voltage CO2 power supplies adopts aluminum upper cover and base, and galvanized steel shell.
2. Protection function: This laser tube's CO2 power supplies has open circuit protection: Under the condition of good protective earth, the high voltage CO2 power supplies can work in open-circuit for a short time, which could avoid the damage to the 130W CO2 power supplies
3.Laser power control is simple on this laser tube's CO2 power supplies, 0-5V analog signal control the laser power can be used, It can also use the PWM (pulse width modulation) signal to control output laser power.

.ZR-130W CO2 laser power supply

Feature

1.This laser tube's CO2 power supplies have a built-in network cable interface, which can be used to connect with external LCD module through the network cable. The external LCD module can display the working status, output current and common fault codes. This is helpful for operators to understand the working status of 130W CO2 power supplies and quickly solve problems. The output current can be adjusted through the rotary potentiometer of the liquid crystal module.

laser tube's CO2 power supplies

2. Good compatibility: The high voltage CO2 power supplies can drive EFR,Yongli,SPT,Weiju and other brand 1.6 or 1.65 meter length 130W CO2 laser tube and it also have a strong adaptability and fast response, cutting advantages of good effect.

3. The laser tube's CO2 power supplies has stable working performance: Each high voltage  CO2 power supplies has been much more rigorous testing procedures, under full load high temperature (52~55 degrees Celsius) 24 hours of aging, to ensure the stability of each 130W CO2 power supplies.

high voltage CO2 power supplies

4. This laser tube's CO2 power supplies adopt G/P/L/G/IN/5V as control signal output interface.The high voltage CO2 power supplies adopts aluminum upper cover and base, and galvanized steel shell.

5. Protection function: This laser tube's CO2 power supplies have open circuit protection: Under the condition of good protective earth, the high voltage CO2 power supplies can work in open-circuit for a short time, which could avoid the damage to the 130W CO2 power supplies

130W CO2 power supplies

6.Laser power control is simple on this laser tube's CO2 power supplies, 0-5V analog signal control the laser power can be used, It can also use the PWM (pulse width modulation) signal to control output laser power.

7. Control is simple: This 130W CO2 power supplies use high or low level control, the use of TTL-level control of the laser can start and stop. At the same time it increases the protection switch, testing is through the external water and ventilation on this high voltage CO2 power supplies

laser tube's CO2 power supplies


Specification

Input 

Input voltage

AC220V±10% (AC110V specified while order)

AC frequency

47~440HZ

Maximum input power

970W

Maximum input current

4.3A

Output

Maximum output voltage

40KV

Maximum output current

36mA

(depending on the laser tubes of different manufacturers)

Efficiency

More than 90% (Full load)

Response speed

Not more than 1ms

Control lnterace

TTL multilevel switching control,effective level can be high and low selection (see control wining diagram)

Insulation

lnput-output

AC 1500V 1 minutes not more than 10mA

lnput-shell

AC 1500V 1 minutes not more than10mA

Output-shell

Connection

Open Circuit Protection

Can be short circuit (requires a good grounding shell,while avoiding the positive electrode and the shell between the arc)

Environmental Requested

Working temperature

-10℃~50℃

Storage of temperature

-20℃~75℃

Relative Humidity

Maximum 85%RH (non-condensing)

Altitude

100,000 feet of work

200,000 feet of storage,dose not work

Cooling methods

Forced air cooling (fan cooling)

Dimensions (LxWxH)

335mmx205mmx100mm


 high voltage CO2 power supplies


Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy

close left right