CO2 Power Supply For Laser Engraving Machine

  • Display Screen Eighty Watt HV PSU Laser Power Suppy

    Display Screen Eighty Watt HV PSU Laser Power Suppy

    1.The black color laser power supply uses ordinary H/L/P/G/IN/5V as laser control signal. And it uses blue aluminum case
    2. The HV PSU laser power supply has good compatibility : This display screen laser power supply can work with most brand 125cm,140cm or 145cm 80Watt or 90Watt glass laser tube.
    3. the black color laser power supply also has strong adaptability and fast response, engraving or cutting benefits good effect.

    Email Details
  • Two Fans 80Watt High Voltage CO2 Laser Power Supplies

    Two Fans 80Watt High Voltage CO2 Laser Power Supplies

    1.Input analog signal(0~5V) or PWM is used to control the output laser power on this 80Watt laser power supplies.
    2.This two fans laser power supplies has RED TEST button to easily figure out CO2 power supplies or CO2 laser tube’s failure. It is very easy and simple to remove trouble.
    3. This 80Watt laser power supplies is used to drive most brand 1200-1450mm CO2 laser tube. The two fans laser power supplies use zero-current half-bridge soft-switch circuit to make sure the CO2 laser power supplies have high efficiency

    Email Details
  • Green Signal Terminal 40w Blue Co2 Laser Power Source

    Green Signal Terminal 40w Blue Co2 Laser Power Source

    1.Good compatibility: This 40w laser power source can be applicable to most brands of 30Watt, 40Watt, 50Watt CO2 laser tube made by different factories.
    2. This blue laser power source has fast response speed and effect.
    3.Because of many protect function, this green signal terminal laser power source dramatically lengthen the lifetime of glass type CO2 tube.

    Email Details
  • Hot
    CE AC110/220V 40W CO2 Laser Power Supply

    CE AC110/220V 40W CO2 Laser Power Supply

    1.This CE 40W laser power supply is special designed for 30W - 50W 700-950mm CO2 laser tube and mini laser engraver, laser stamp engraving machine and laser medical equipment.
    2.The AC110/220V laser power has one year warranty and its lifetime even can be 3-4 years. It can drive all brand 700/800/850/900mm CO2 tube made in China.
    3.The CO2 laser power supply use 0-5V or PWM signal for laser control. The interface pin is K+/K-/D+/D-/G/IN/5V. 5V/1A or 24V/2A output.

    Email Details
  • Hot
    PWM/0-5V Control 50w Co2 Laser Power Supply

    PWM/0-5V Control 50w Co2 Laser Power Supply

    1.This 50w laser power supply has stable performance: Each  co2 power supply has been much more rigorous testing procedures, under full load high temperature (52~55 degrees Celsius) 24 hours of aging, to ensure the stability of each power supply.
    2.Good compatibility: This PWM/0-5V laser power supply can match with most brand 1000mm 50W CO2 laser tube and it also has a strong adaptability and fast response, engraving, cutting advantages of good effect.
    3.Control is simple: This co2 laser power supply selects high or low level control, the use of TTL-level control of the laser can start and stop. At the same time it increases the protection switch, testing is through the external water and ventilation on this PWM/0-5V laser power source.

    Email Details
  • LCD Screen AC110V 60W HV Carbon Dioxide Powersupply

    LCD Screen AC110V 60W HV Carbon Dioxide Powersupply

    1.This LCD screen CO2 power supply has high efficiency and quick response with its zero current half bridge soft switching circuit. Thus it is easy to cooperate with most brand 60W co2 laser tube. 
    2.This 60W CO2 laser power supply terminal control is simple and adapted to high and low level signals. TTL level can be used to control the start and stop of laser power. At the same time, an abnormal protection switch was added to detect if the external water is ventilated or not.
    3.Both analog signals of 0 to 5V and PWM signals are used to control and regulate this AC110V CO2 power supply’s output laser power.

    Email Details
  • Air Cooling 80W Network Port CO2 Laser Power Supplies

    Air Cooling 80W Network Port CO2 Laser Power Supplies

    1. This 80W laser power supplies has simple control which selects high and low level for laser power control. The use of TTL-level control can realize start and stop. At the same time the air cooling laser power supplies add a protection switch, testing is made by external water and ventilation.
    2. The laser power control is simple, the network port laser power supplies can use 0-5V analog signal to control the laser power. Also the 80W laser power supplies can also use the PWM (pulse width modulation) signal for laser power control.
    3. The air cooling laser power supplies have good protection function: The network port laser power supplies have open circuit protection to make the 80W laser power supplies to short-term work in the open state, so as to make it avoid the laser tube broken.

    Email Details
  • 220V Input 60W Carbon DioxideHV Laser Power Supply

    220V Input 60W Carbon DioxideHV Laser Power Supply

    1 This.60W laser power supply uses imported USA,Japan,German,France and Taiwan’s high quality components for major parts to avoid the error in future and strengthen lifetime. The carbon dioxide laser power supply can be widely used to drive 1200mm or 1250mm 60W CO2 laser tube.
    2. This 220V inpuit laser power supply’s main advantage is high frequency,quick response speed, less volume, less weight, easy operation with complete protecting function.
    3.The 220V input laser power supply’s control is easy and simple. It adopts high or low level control, the TTL-level control makes laser beam’s output start and stop quickly.

    Email Details
  • Black Color AC220V 60W Power Supply For CO2 Tube

    Black Color AC220V 60W Power Supply For CO2 Tube

    1.The power supply for CO2 tube has open circuit function, a good grounding in the case of protection, the AC220V power supply to short-term work in the open state.
    2.The 60W power supply ues PWM or 0-5V singal for laser power control. The H/L/P/G/IN/5V terminal is used for control signal input.
    3.The LCD display screen is optional on the AC220V power supply. It can show this black color power supply’s working status,output current and fault code which can help operatoe to remove trouble easily.Also the potentiometer of this display screen can be used to adjust output current.

    Email Details
  • 1
  • 2
  • >
  • Total 10 Records
Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy