CO2 Power Supply For Laser Die Cutting Machine

  • AC110/220V 450W CO2 Power Supply For Folding Laser Tube

    AC110/220V 450W CO2 Power Supply For Folding Laser Tube

    1.This 450W CO2 power supply is composed of three 150W CO2 laser power supplies in parallel. It is mainly used to drive the high-power CO2 folding laser tube which is used in the laser knife mold machine.
    2. This AC110/220V CO2 power supply adopts G/P/L/G/IN/5V as control signal output interface.The AC110/220V CO2 power supply adopts aluminum base and upper cover, galvanized sheet housing case.
    3. Good compatibility: The 450W CO2 power supply can drive Yongli,Weiju,EFR,SPT and other brands 450watt folding 3 cores CO2 laser tube and it also has a strong adaptability and fast response, cutting advantages of good effect.

    Email Details
  • HV 750watt Large Laser Power CO2 Power Source

    HV 750watt Large Laser Power CO2 Power Source

    1.This 750watt CO2 power supply includes five high-quality 150W laser power supplies in parallel. With the 5 cores folding CO2 tube,It will be used on large power laser cutting machine.
    2. The laser power control is simple, the large laser power CO2 power source can use 0-5V signal to control the laser power. Also this large laser power CO2 power source uses the PWM (pulse width modulation) signal for laser power control too.
    3. This 750watt CO2 power source has easy and simple control method which uses high and low level for laser power control. The use of TTL-level control can realize start and stop

    Email Details
  • Analog Signal 200W Folding CO2 Tube Power Supplies

    Analog Signal 200W Folding CO2 Tube Power Supplies

    1.This analog signal power supplies use ordinary H/L/P/G/IN/5V interface to receive control signal. It adopts aluminum upper cover and base, and galvanized plate casing.on this analog signal power supplies.
    2. The 200W power supplies have good compatibility : This 200W power supplies can match with RECI,Yongli,SPT,EFR,Weiju and other brand 200W CO2 tube,besides this feature, the 200W power supplies also have strong adaptability and fast response, engraving or cutting benefits good effect.
    3.The folding CO2 tube power supplies have good protection feature: The folding CO2 tube power supplies have open circuit protection to make this folding CO2 tube power supplies work for a short time in the open state

    Email Details
  • 5V/PWM 200watt Laser PSU For Large Power CO2 Tube

    5V/PWM 200watt Laser PSU For Large Power CO2 Tube

    1.The 200watt laser PSU’s control is applicable to high/low level signal. TTL level is to control the on/off of the laser power with a protective switch to check water-flow and ventilation.
    2.Input analog signal(0~5V) or PWM is used to control the output laser power on this laser PSU for large power CO2 tube.
    3 This 5V/PWM laser PSU is equipped with two cooling fans. Better heat dissipation can protect the internal electronic components of this 4PCS flybacks laser power supply

    Email Details
  • Negative High Voltageparallel 750watt Laser Power Supply

    Negative High Voltageparallel 750watt Laser Power Supply

    1.The parallel laser power supply has open circuit function, a good grounding in the case of protection, the parallel laser power supply has short-term work in the open state, so to avoid the laser tube burst due to the damage caused by parallel laser power supply, thereby enhancing parallel laser power supply of life.
    2.The 750watt laser power supply uses high or low level control, the use of TTL-level control makes the laser power start and stop quickly. At the same time,750watt laser power supply has the protection switch, testing is through the external water and ventilation
    3.The negative high voltage laser power supply can match with most brand 700/800W folding CO2 tube. Also this negative high voltage laser power supply has a strong adaptability and quick response on cutting.

    Email Details
  • Hot
    Original 300/500W Laser Die Cutter's Co2 Power Supplies

    Original 300/500W Laser Die Cutter's Co2 Power Supplies

    1.The laser die cutter's co2 power supplies’ control is applicable to high/low level signal. TTL level is to control the on/off of the laser power with a protective switch to check water-flow and ventilation.
    2 This300/500watt co2 power supplies are equipped with two cooling fans on each power supply. Better heat dissipation can protect the internal electronic components of the 300/500watt co2 power supplies
    3. Input analog signal(0~5V) or PWM is used to control the output laser power on this original co2 power supplies.

    Email Details
  • 300W 6PCS Laser Power Supply For Laser Die Cutting

    300W 6PCS Laser Power Supply For Laser Die Cutting

    1.This 300W Laser Power Supply is composed of two 150W laser power supplies in parallel. It is mainly used in CO2 high-power laser knife mold machine.
    2. This 300W Laser Power Supply adopts G/P/L/G/IN/5V as control signal output interface.The Laser Power Supply For Laser Die Cutting adopts aluminum outside shell which is good for air cooling..
    3. Good compatibility: The 6pcs Flybacks Laser Power Supply can drive EFR,Yongli,SPT and other brand300W sealed glass type CO2 laser tube and it also has a strong adaptability and fast response, cutting advantages of good effect.

    Email Details
  • Laser Knife Moulding Machine's 450watt Laser Power Supply

    Laser Knife Moulding Machine's 450watt Laser Power Supply

    1. The 450watt power supply has stable laser output functions. Each 450watt power supply has been much more rigorous testing procedures, under full load high temperature (52~55 degrees Celsius) 24 hours of aging to ensure high stability of each 450watt power supply..
    2. The laser knife moulding machine's power supply’s control is easy and simple. It adopts high and low level control, the TTL-level control makes laser beam’s output start and stop quickly.
    3.The laser power supply has excellent protection function. The laser power supply has open circuit protection, which make this laser power supply has short-term work in the open circuit status
    4. This.450watt power supply uses imported

    Email Details
  • 220V 6PCS Flybacks 300W CO2 Tube's Power Supplies

    220V 6PCS Flybacks 300W CO2 Tube's Power Supplies

    1. This 220/110V input power supplies’ main advantage is high frequency,quick response speed, less volume, less weight, easy operation with complete protecting function.
    2. This.300W CO2 tube's power supplies uses imported USA,Japan,German,France and Taiwan’s high quality components for major parts to avoid the error in future and strengthen service time. This 300W CO2 tube's power supplies can be widely used to work with large power folding 300watt CO2 laser tube.
    3.The 6PCS FLYBACKS power supplies has the protection switch. Laser power control is simple, it can use 0-5V analog signal or PWM (pulse width modulation) signal to adjust and control laser power’s output.

    Email Details
  • 1
  • 2
  • >
  • Total 12 Records
Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy